把紙平放在離心機放鞋子的托盤上，樣品鞋牢固地固定在托盤里，然后往鞋子內部加入一定深度的水，最后啟動機器，

托盤在帶有垂直軸的離心機上，由慢速至中速直至高速地旋轉，這樣水鞋子里面的水就對鞋子內部施加一定的壓強，此壓強遠大于人腳正常穿著，運動時外部水對鞋面材料的壓強，

更遠大于目前有些傳統測試，“臉盤泡水”產生的壓強，檢測時間一般為30-60分鐘，防水檢測結束，打開離心機把樣品取出，

如鞋子漏水，放在托盤的紙就會濕，同時，離心機外圍的透明亞克力也會出現明顯的水珠，最后把鞋子里的水倒出，用烘干機進行烘干，最后解剖樣鞋尋找漏水原因，進而進行改善。

Put the paper on centrifuge tray of the shoes.Sample shoes firmly fixed in the tray,Then the shoes inside in certain depth of water,The final rev.Move the machine,

Tray on the centrifuge with vertical axis,From a slow to medium speed until the high-speed rotation,So water the inside of the shoes for shoes inside Add a certain pressure,

The pressure is greater than human feet normal wearing,Farther than the traditional test,"Face bubble water" produced by the pressure, testing time is 30 to 60 minutes commonly, waterproof testing end, open the centrifuge to remove the samples, such as leaky shoes,In the paper tray will wet,

At the same time, the centrifuge peripheral transparent acrylic also can appear clear water, finally, the water poured out of the shoes, use the dryerDrying, and finally the anatomy of the sample shoes to find leakage causes, and then to improve.

主營產品：襪套測試機,防水貼條機,壓膠機,高透防水測試機,面料測水壓機,成品鞋烘干機,防水條機,防水鞋機,防水壓膠機,熱氣縫合密封機等